XAIRCRAFT STELLA - Manual (Page 3)

1 ©2013 XAircraft 版权所有
DISCLAIMER
1. Use XAircraft products within the limits permitted by local laws and regulations. XAircraft is not responsible
for any illegal activities.
2. Stella is designed as an aeromodelling product. Please strictly follow the aeromodelling guidelines for your
area; XAircraft is not responsible for the use and operation of aircraft used for carrying Stella.
3. Model aircraft are not toys! Fly under professional guidance and strictly follow the instruction rules in this
document. XAircraft is not responsible for consequences caused by improper installation, incorrect setting or
the operation of this product.
SAFETY PRECAUTIONS
1. STELLA gimbal is only designed for GoPro Hero 3 and 3+ sports cameras.
2. You must position the GoPro camera onto STELLA before powering-on the aircraft at all times. Powering-on
an empty gimbal connected to the aircraft may cause damage.
3. Do not install any third party accessories on the GoPro or gimbal.
4. Ensure you use the original GoPro camera batteries.
5. Do not attempt to adjust or alter the mechanical structure of the gimbal.
6. Please use a separate power source when testing or configuring STELLA, or remove the propellers from the
aircraft, or disconnect the motors for your safety.