XAIRCRAFT STELLA - Manual (Page 4)

2 ©2013 XAircraft 版权所有
STELLA Overview
Features
Different versions of firmware may support different functions. The main features are listed below:
 Two types of installation is supported: Standard (hanging) or upright
 Control Mode: Speed Mode and Position Mode.
 90° Pitch Switch.
 Built-in GoPro USB connector, transferring the video signal to OSD or video transmitter.
 Built-in BEC charges the GoPro in the air.
 Built-in green configuration software. No drivers required. Easily upgrade the firmware and software via PC.
Specifics
Features Description
Camera GoPro Hero3 / GoPro Hero 3+
Wind-resistance <8m/s (17.9mph / 28.8km/h)
Max. Remote Control Angle Roll -10
°~10°
Pitch -110
°~20°
Attitude Precision 0.08
°
Environment Temperature Limits -10°C ~ 55°C
Remote Controller Standard Receiver with minimum 9 channels or S.BUS Receiver for full
function access (Note SBUS and SBUS2 require a transmitter with at least 11
channels for full use of Stella's features whilst flying)
Configuration Software Windows System only
Electrical Specifications Voltage
：DC 10.5V~22.2V （3S – 6S）
Power consumption:
 Max. 10.2W （[email protected]）when charging the GoPro
 Normal 3.0W （[email protected]）
Weight 120g / 195g (with GoPro onboard)
Dimension
（Max.）
83.5mm
×83.5mm×92.5mm