Z-Systems z-CL6 six-channel mastering dynamics processor - Manual (Page 6)

z-CL6 manual
6
LOAD
preset #21 saved
(L knob) (R knob)
MIDI #12
SAVE READ DUMP
Figure 6 - confirmation of preset save
There is one special preset that can not be over-written. This preset is given number 00 and stores
the z-CL6 's "flat" settings. This is the preset you will want to use in order to return the z-CL6 to a
"blank" setting. If you attempt to over-write preset 00, the display will appear as in Figure 7,
which tells you that the preset was not saved and that you should choose another preset number.
LOAD
preset #00 not saved
(L knob) (R knob)
MIDI #12
SAVE READ DUMP
Figure 7 - indication that preset has not been saved
To recall a preset, from the screen in Figure 5 press the button beneath the LOAD indication. The
preset indicated in the display will be loaded and the z-CL6 will jump to the mode from which the
preset mode was invoked.
MIDI Automation
The z-CL6 can be automated via MIDI commands; it supports MIDI program change commands
and also uses system exclusive commands to allow the unit’s entire collection of presets to be sent
to and restored from a MIDI sequencer.
The z-CL6’s MIDI controls are on the same screen as the preset LOAD and SAVE screen. Simply
press the presets button once, which brings the z-CL6 to the state shown in Figure 8.
LOAD
preset #21
(L knob) (R knob)
MIDI #12
SAVE READ DUMP