Fluke 725 - Manual (Page 15)

Safety Information
5
W
Warning
•
When using a pressure module, make sure the process pressure line is shut off and depressurized
before you connect it or disconnect it from the pressure module.
•
Use only 4 AA batteries, properly installed in the calibrator case, to power the calibrator.
•
Disconnect test leads before changing to another measure or source function.
•
When servicing the calibrator, use only specified replacement parts.
•
To avoid false readings, which could lead to possible electric shock or personal injury, replace the
battery as soon as the battery indicator ( M ) appears.
Caution
To avoid possible damage to calibrator or to equipment under test:
•
Disconnect the power and discharge all high-voltage capacitors before testing resistance or continuity.
•
Use the proper jacks, function, and range for your measurement or sourcing application.