Receiving faxes – Epson WorkForce 610 Series User Manual

Page 24

Advertising
background image

24

Faxing a Document or Photo

To redial the last fax number you used, press

Redial/Pause

. The last fax

number is displayed on the screen.

To specify a different time to send your fax, press

Menu

, press

l

or

r

to select

Fax Send Settings

, press

OK

, and select

Send Fax Later

. Then press

r

and

select

On

. (You cannot send or receive any faxes until the delayed fax has been

sent or cancelled.)

Press

Menu

and select

Poll to Receive

to receive a fax from another fax

machine to which you have dialed (such as a fax information service).

Receiving Faxes

Before receiving faxes, make sure you load plain paper and select the

Paper Size

setting that matches the size of paper you’ve loaded (see page 19). If the incoming
fax pages are larger than the paper size you loaded, the fax size is reduced to fit or
printed on multiple pages, depending on the

Automatic Reduction

setting you

select.

If you run out of paper during printing, you see the error message

Paper out

.

Load more paper and press the

x

Start

button to continue.

To receive faxes automatically, make sure the

Auto Answer

light on the control

panel is turned on. To turn it on, press the

Auto Answer/Space

button.

Note:
To change the number of rings before your product answers, see page 17.

To receive faxes manually, press the

Auto Answer/Space

button to turn off this

feature (and the light). Then follow these steps:

1. When your telephone rings, lift the phone off the

hook. You see this screen:

2. Select

Receive

, then press

OK

.

3. If you want to receive the fax, press the

x

Start

button.

4. After all the pages are received, you see the screen

shown above. Replace the phone on the hook.

Advertising