Back-up lamps, License plate lamp, Back-up lamps license plate lamp – Pontiac 2007 Solstice User Manual

Page 282

Advertising
background image

Back-Up Lamps

The back-up lamps
are located in the
rear bumper.

To replace a bulb, do the following:

1. Reach behind, up and under the rear bumper

and locate the bulb socket.

2. Turn it counterclockwise to remove from the

bulb assembly.

3. Pull the bulb from the bulb socket.
4. Push in a new bulb into the bulb socket.
5. Reinstall the bulb socket by lining up the tabs

in the lamp assembly and turn it clockwise to
secure it.

License Plate Lamp

To replace the license plate lamp bulb, do the
following:

1. Remove the two screws holding the license

plate lamp assembly to the fascia.

2. Turn and pull the license plate lamp forward

through the fascia opening.

3. Turn the bulb socket counterclockwise and

pull the bulb straight out of the socket.

4. Install the new bulb.

5. Reverse Steps 1 through 3 to reinstall the

lamp assembly.

282

Advertising