Outside power mirrors, Outside power mirrors -31, Compass calibration – Pontiac 2006 Torrent User Manual

Page 101: Cleaning the mirror

Advertising
background image

Compass Calibration

The compass may need calibration if one of the
following occurs:

If CAL is displayed while driving in the vehicle.

After approximately five seconds, the display does
not show a compass heading (N for North, for
example), there may be a strong magnetic field
interfering with the compass. Such interference may
be caused by a magnetic antenna mount, magnetic
note pad holder, or a similar magnetic item.

The compass does not display the correct heading
and the compass zone variance is set correctly.

In order to calibrate, CAL must be displayed in the
mirror compass windows. If CAL is not displayed, push
in the on/off button for approximately eight seconds
or until CAL is displayed.

The compass can be calibrated by driving the vehicle
in circles at 5 mph (8 km/h) or less until the display
reads a direction.

Cleaning the Mirror

When cleaning the mirror, use a paper towel or similar
material dampened with glass cleaner. Do not spray
glass cleaner directly on the mirror as that may cause
the liquid cleaner to enter the mirror housing.

Outside Power Mirrors

The controls for the
power mirrors are located
on the instrument panel.

To adjust the mirrors do the following:

1. Move the selector switch to the left or right to

choose the driver’s or passenger’s mirror.

2. Press the corresponding edges of the round control

pad to move each mirror to the desired direction.

Adjust each outside mirror so that you can see a little of
your vehicle, and the area behind your vehicle.

2-31

Advertising