Pontiac 2005 Bonneville - Manual (Page 355)

Removing the Flat Tire and
Installing the Spare Tire
1. If your vehicle has aluminum wheels and a center
cover hides the wheel nuts, remove the center
cover by using the flat end of the wrench to pry it
off. Do not drop the cover or lay it face down,
as it could become scratched or damaged. Do not
use a hammer or mallet on this type of cover.
2. Use the wheel wrench to loosen the wheel nuts, but
do not remove them.
3. Attach the wheel wrench to the bolt to create a
jack handle.
4. Turn the wheel wrench counterclockwise to lower
the jack lift head until it fits under the vehicle.
5-95