MagnaFlow AUDI A3 QUATTRO Stainless Cat-Back System PERFORMANCE EXHAUST User Manual

MagnaFlow For the car

Advertising
background image

Step 1: (Carefully read all instructions before
installation) Begin removal of the OEM exhaust
system by loosening the OEM clamp located behind
the catalytic converter. Do not damage or discard the
OEM clamp nor rubber insulators, as they will be
reused to mount the new system. Disengage the
welded hangers from the OEM rubber insulators and
remove the entire OEM exhaust system.

Step 2: Install the new exhaust system by using a
front to rear method. Using the OEM clamp, install
the Resonator Assembly and insert the welded
hangers into the OEM rubber insulators. Leave all
clamps loose for the final adjustment of the complete
system. Using the supplied 2.50" clamps, install the
Mid-Pipe and Muffler Assembly in a similiar fashion.

Step 3: With all components mounted loosely, adjust
the system for overall aesthetics and clearance of
frame & bodywork. (MAGNAFLOW recommends at
least 1/2" of clearance between the exhaust system
and any body panels to prevent heat-related body
damage or fire.)

Step 4: Once a final position has been chosen for the
new system, evenly tighten all fasteners from front to
rear. The supplied band clamps must be VERY tight
to properly align the pipes and prevent leaks
(Approximately 65ft-lbs). U-bolt clamps should be
tightened to approximately 30-35ft-lbs. Inspect all
fasteners after 25-50 miles of operation and retighten
if necessary.

Mufflers, Converters,

Systems and Tips

INSTALLATION INSTRUCTIONS

15598

2006-2008 Audi A3 Quattro 3.2L

Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.

** Magnaflow Performance Exhaust recommends professional
installation on all their products

Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688

Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500

JUNE 24, 2010

MID-PIPE

2X 2.50" CLAMP

MUFFLER ASSY

RESONATOR ASSY

Advertising
This manual is related to the following products: