Ryobi RY80930 - Manual (Page 11)

Page 7 — English
PROdUCT SPECiFiCATiONS
Engine .............................................................................................................................................................Honda GCV160
Fuel Tank Capacity ....................................................................................................................................................0.25 gal.
Maximum Pounds Per Square Inch Pressure* ......................................................................................................... 2,800 psi
Maximum Gallons Per Minute* ...................................................................................................................................2.3 gpm
Maximum Inlet Water Temperature ................................................................................................................................104˚F
*Max. rating determined by PWMA Standard 101
KNOW YOUR PRESSURE WASHER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
AUTOMATiC dETERGENT iNJECTiON
SYSTEM
Pour pressure washer detergent into the detergent tank to
apply detergent quickly and easily to your cleaning project.
Use of the soap nozzle will activate the detergent injector
at a 20:1 dilution ratio.
FUEL TANK
This fuel tank has a maximum capacity of 0.25 gal. Use
unleaded automotive gasoline in the engine.
HONdA GCV160 ENGiNE
This Honda engine enables the pressure washer to achieve
2,800 psi (pounds per square inch) at a rate of 2.3 gpm
(gallons per minute). Please read the engine manual included
with this product.
HOSE STORAGE
Once the high pressure hose is rolled, hang it on the back
of the machine using the stretch strap to secure in place.
ON/OFF SWiTCH
The on/off switch is used in combination with the starter
grip and rope to start the engine. It is also used to turn the
engine off.
STARTER GRiP ANd ROPE
The starter grip and rope is pulled to start the machine.
SOAP NOZZLE
The blue soap nozzle is used to apply detergent at low
pressure only.
THERMAL RELiEF VALVE
This pump feature will prevent water temperatures from
reaching harmful levels by releasing a small amount of water
from a rubber hose. Once the water has drained, the thermal
relief valve will reset itself.
TRiGGER HANdLE
The trigger handle has a gripping surface that provides
added control of the spray wand and helps reduce fatigue.
TRiGGER WiTH LOCK OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock out provides protection against
unauthorized use.
FEATURES