Denon AVR-2106 - Manual (Page 42)

39
ENGLISH
Advanced Setup – Part 1 Advanced Setup – Part 1
ENGLISH
3
Press the CURSOR F F or G G button to select the
desired setting.
4
Press the ENTER button to enter the setting.
• The “Option Setup” menu appears.
This sets the amount of attenuation applied for audio output
muting.
Option Setup
Setting the Muting Level
2 Press the CURSOR D D or H H button to select
“Muting Level” at the “Option Setup” menu,
then press the
ENTER button.
• The “Muting Level” screen appears.
• Use this to turn the on-screen display (messages other than the
menu screens) “ON” or “OFF”.
• Sets the on-screen display mode.
Setting the On-Screen Display (OSD)
1 Press the CURSOR D D or H H button to select “On
Screen Display” at the “Option Setup” menu,
then press the
ENTER button.
• The “On Screen Display” screen appears.
2 Press the CURSOR F F or G G button to select
“ON” or “OFF”.
–20 dB:
Attenuation of the volume by –20 dB from the present level.
–40 dB:
Attenuation of the volume by –40 dB from the present level.
– – – dB:
The volume level is completely muted.
3 Press the CURSOR D D or H H button to select the
on-screen display mode, then press the CURSOR
F F or G G button to select “MODE1” or “MODE2”.
4
Press the ENTER button to enter the setting.
• The “Option Setup” menu appears.
MODE1:
Prevents flickering of the on-screen display when there is no
video signal.
MODE2:
Flickering is not prevented.
Use this mode if the on-screen display does not appear in
MODE1, which may happen depending on the TV being used.
4 Press the CURSOR D D or H H button to select
“Exit”, then press the ENTER button.
• The “System Setup” menu appears.
3
Press the ENTER button to enter the setting.
• The “Advanced Playback” menu appears.
1 Press the CURSOR D D or H H button to select
“Option Setup” at the “System Setup” menu,
then press the
ENTER button.
• The “Option Setup” screen appears.