Ryobi P715 - Manual (Page 7)

7 — English
OPERATION
MAINTENANcE
WARNINg:
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
WARNINg:
To avoid serious personal injury, always remove the
battery pack from the product when cleaning or
performing any maintenance.
gENERAL MAINTENANcE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNINg:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
Only the parts shown on the parts list are intended to be
repaired or replaced by the customer. All other parts should
be replaced at an Authorized Service Center.
WARNINg:
Battery tools are always in operating condition. Therefore,
switch should always be in the
Off position when not in
use or carrying at your side.
SWITch TRIggER
See Figure 1, page 8.
To turn the spotlight
ON, depress and hold the switch trigger.
To turn it Off, release the switch trigger.
LOcK-ON bUTTON
See Figure 1, page 8.
The spotlight is equipped with a lock-on feature, which
is convenient for continuous use for extended periods of
time.
To lock-on:

Depress the switch trigger.
 Push in and hold the lock-on button, located on the side
of the handle.
 Release the switch trigger.
 Release the lock-on button.
 To release the lock, depress and release the switch
trigger.
WARNINg:
Never leave the spotlight in the locked-on position and
unattended. The lens becomes very hot during use and
could result in serious injury or property damage.