Document Outline

• Quick Set Up Guide
• TE-4000/4500
• Shared Check Tracking
• Floating Clerk
• &
• Shared Kitchen Printing
• November 2003
• CHAPTER 1
• HARDWARE CONFIGURATION
• CHAPTER 2
• LOADING THE IPL
  • QUICK SET UP 1
    • Required equipment
    • A PC and a CF card
• CHAPTER 3
• INITIALISING THE TERMINAL
  • QUICK SET UP 2
  • Turn the key to program
• CHAPTER 4
• MEMORY ALLOCATION
  • Quick set up 3
    • Setting up the memory allocation for shared clerk interrupt,
  • This allocation will give you 20 clerks and 100 tables
  • This completes the simple set up of check tracking files
  • The next pages will explain the memory allocation in detail
• File definition codes
  • Enter the file code 1, 2, 3, 4, 5 before the file number
    • The new files in the memory allocation
      • Clerk files
        • Program / Buffer files
    • CHAPTER 5
    • FREE FUNCTION KEYS
      • QUICK SET UP 4
        • New Old Check key
          • New Balance Key
          • Covers Key
          • Table Number key
          • Table Transfer
          • Add Check
          • Separate check
      • The next few pages will explain the function keys in detail
• New Function Key
  • CLOCK IN/OUT which is used for the time and attendance funct
    • Clerk transfer Key (13)
      • Operation of clerk transfer
      • Customer number key (43)
      • Ketten Bon (113)
      • New Balance (06)
        • New / Old Check (93)
      • Operator Number Key (078)
      • Receipt (038)
      • Price shift (070)
        • This is usually used for half pints and doubles
      • Separate Check (095)
      • Tray Total (074)
        • Notes
    • CHAPTER 6
    • SETTING UP THE
    • IN-LINE NETWORK
      • QUICK SET UP GUIDE 5
• This set up is designed for four terminals
  • Make sure all terminals have the correct Terminal ID’s after
    • Send In-Line connection table to all terminals
      • Command code = 091
      • To set up the in-line network you must install the I/O PB-17
      • There are 2 types of In-line network selectable via a select
      • Selector switch position 1 = Casio In-Line (ARCNET)
      • Selector switch position 2 = Cat-5A Cable
      • Initialise the first terminal and the machine number will be
      • Example
      • Record 1-91 Master Terminal = 1100
        • Sending the In-line connection table across the network
      • Command code = 091
        • In this type of system the check tracking the detail is kept
          • This type of system allows you to float checks and clerks an
          • Self Master System
          • Self Master Self Master Self Master
          • In this type of system the check tracking detail is kept in
          • This type of system still allows you to consolidate sales fi
    • CHAPTER 7
    • SETTING UP SHARED CHECK TRACKING
      • QUICK SET UP GUIDE 6
      • Make sure files 15 and 60 are allocated in memory allocation
      • 2622 100000
      • 2622 100000
      • Master recovery procedure to reconnect the network
      • Note: MGR Mode is X position
      • Use the procedure below to program the Table Clerk
      • Turn the key to program
        • To Program to a range of clerks
          • To add to a check/table more than once
      • Use the procedure below to program the table transfer key
      • Turn the key to program
    • CHAPTER 8
    • SETTING UP FLOATING CLERK INTERRUPT
      • QUICK SET UP 7
      • Setting up the 2722 code to allow clerk interrupt
      • Switch the terminal to the program position
• How to set up floating clerk Interrupt in detail
  • Enable Clerk Interrupt in the 2722 code
    • 2722 1000000000
      • This setting is very Important when using floating clerk int
      • 2622 100000
    • CHAPTER 9
    • SETTING UP SHARED PRINTING
      • Quick set up 8
      • Programming of the printer connection table
      • Record number for setting up Order/Kitchen Printer = 4
      • Flag Mac the terminal
• How to set up shared printing in detail
  • Turn the key to program
    • Program 0398 for Com 3
• External printer 1
  • To set up an Epsom TM-U210 you need to enter 018020
• External printer 2
  • CHAPTER 10
    • SETTING UP TIME & ATTENDENCE
      • Quick set up 8
      • Make sure you have allocated files 19 and file 61
      • Maximum number of records is 99 for both files
      • Assign a clock In/Out key to the keyboard
        • Operation
      • First program the employee file from the worksheet below
        • Turn the key to program
      • Clock In/Out function worksheet
      • To take the time and attendance report
    • CHAPTER 11
    • SETTING UP
    • GRAPHIC LOGO’S
      • Double click the new TE-4000 Logo & Watermark folder
      • Go back to your CV-10 folder and double click on the icon be
      • Click on the OK button on the user maintenance screen
      • You should now see this screen
      • Double click on the Graphic Logo Icon
      • And proceed to the next page
      • You should now see the two logo’s that you pasted to the log
      • Set the file number on the software you wish to send down to
    • CHAPTER 12
    • CF CARD OPTIONS
      • In-Line send and receive
    • CHAPTER 13
    • DALLAS KEYS
      • Dallas key Installation
      • Dallas key programming
      • To enable auto new balance for magnetic Dallas keys
      • Turn to program mode
      • 2622 300000
        • To allow use of magnetic Dallas keys
      • Turn to program mode
      • 2722 1100000000
    • CHAPTER 14
    • ERROR CODES