Volvo 2006 C70 - Manual (Page 130)

Tire sealing system
Replacing the container and hose after use
Unscrew the two screws (2) on the orange casing.
Remove the speed limit sticker (4) and the expiration date decal (1).
Release the safety catch (5) and remove the casing (3) from the sealing system unit.
Press down the button (8) while twisting the container (6) and retaining bracket (9) clockwise approximately 2/3 of a
turn and remove them.
To remove the hose (10), first press it into housing and then pull it out from the opposite side.
Wipe away any remaining sealing compound, or scrape it off if it has already hardened.
Insert a new air hose and check that it is properly seated.
Unscrew the cap from the new sealing compound container and check that the seal (7) is intact and undamaged.
Screw the container (6) firmly into the bracket (9).
Mount the bracket on the housing and twist it counterclockwise until it clicks into place.
Reinsert the casing (3). Check that it is correctly in place and tighten the screws (2), and press the safety catch (5)
into position.
Affix the speed limit decal (4) and a new expiration date decal (1).
The empty container and used hose can be discarded as normal refuse, or recycled. Consult local regulations.
Replacing the container after its expiration date has passed
Unscrew the two screws (2) on the orange casing.
Remove the speed limit sticker (4) and the expiration date decal (1).
Release the safety catch (5) and remove the casing (3) from the sealing system unit.
Unscrew and remove the container.
Unscrew the cap from the new sealing compound container and check that the seal (7) is intact and undamaged.
Screw the container (6) firmly into the bracket (9).
Reinsert the casing (3). Check that it is correctly in place and tighten the screws (2), and press the safety catch (5)
into position.
Affix the speed limit decal (4) and a new expiration date decal (1).
The empty container can be discarded as normal refuse, or recycled. Consult local regulations.
Contents | Top of Page