Chrysler 2009 Aspen Hybrid - Manual (Page 79)

JUMP-STARTING PROCEDURES
Your Hybrid vehicle is equipped with both a 12-Volt
battery and a high voltage battery. Either battery may
become discharged and cause a no crank condition as a
result of low voltage.
If the 12-Volt battery’s state of charge is to low and the
engine will not crank, the 12-Volt battery light located in
the cluster may illuminate. If this occurs refer to “Jump-
Starting — 12-Volt Battery” in this Section.
If the high voltage battery’s state of charge is too low and
the engine will not crank, the Navigation radio will
display a “Charge Insufficient” message. If this occurs
refer to “Charge Assist Procedure — High Voltage Bat-
tery” in this Section.
Charge Assist Procedure — High Voltage Battery
The “Charge Assist” procedure allows you to charge the
high voltage battery using the 12-Volt battery system. The
Navigation radio will guide you through the “Charge
Assist” procedure.
Charge Insufficient Message
WHAT TO DO IN EMERGENCIES 77
6