SoundMax SM-CDM1039 - Manual (Page 13)

13
General operations
Power button
Press any button (except EJECT and RELEASE buttons) to switch the unit on. The display will show a message
“WELCOME”. Press and hold POWER button to switch the unit off.
Note: After the unit is off, volume level and radio current settings will be memorized, and when you turn the
unit on it will resume the stored status you set.
Volume control
Rotate VOL knob. The larger the number shown on the display is, the higher the volume level is.
Sound settings
Press SEL button shortly and repeatedly to select a mode: VOL => BAS => TRE => BAL => FAD. Rotate VOL
knob to adjust each mode.
VOLUME: 00, 02,......, 39
BASS/TREBLE: -7, -5,......, 0, +1, +2,......+5, +7
BALANCE: 7L,......, 7R
FADER: 7R,...., 7F
Note: When Equalizer is enabled, bass and treble adjustment is unavailable.
Note: In each mode, the waiting time is about 5 seconds, and the waiting time is over, it returns to the last
display mode of radio or disc playback mode.
Mode selection
Press MODE button to cycle the play modes AUX => RADIO => DISC => USB => CARD.
Note: DISC, USB and CARD modes are only available when a disc, USB or memory card is inserted into the
unit.
Mute function
Press MUTE button to cancel the sound. Press it again or adjust the volume level to resume the sound.
Clock setting
You can set the clock displayed on the LCD. Press PTY/CLK button, then press and hold this button for 3