Pilz PSSnet SHL 8T MRP - Manual (Page 51)

Entering the IP Parameters
52
2.9 Faulty device replacement
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
2.9 Faulty device replacement
The device provides two plug-and-play solutions for replacing a faulty device
with a device of the same type (faulty device replacement):
X Configuring the new device via an AutoConfiguration Adapter (see on
page 39 „Loading the system configuration from the ACA“) or
X Configuration via DHCP Option 82 (see on page 186 „Setting up DHCP
Server Option 82“) .
In both cases, when the new device is started, it is given the same configu-
ration data that the faulty device had.
Note: If you replace a device with DIP switches, please ensure that the DIP
switch settings are identical.