Pilz PMI 509 - Manual (Page 29)

Putting into Service
Operating Manual PMI 5
1002241­EN­05 29
7.2.1 Backup and restore
Program which you can use to save or restore an entire directory structure.
7.2.2 Password settings
Assign a password for the Control Panel to protect the settings in this area. Two levels can
be protected with different passwords.
Level 1: Master Control panel password
The complete Control Panel can be protected with a password.
Defining a password: Enter a password. Enter the password again in the "Confirm pass­
word" field.
Change password: As in defining a password
Delete password: Deselect Ask for master password ….
If you select Ask for master password ..., then the system will request that the master pass­
word is entered before the Control Panel opens.
Timeout
If an incorrect password is entered three times or no valid password is entered within the
selected time, then the Control Panel is closed.
Level 2: Control panel applets
Individual "applets" of the Control Panel can be protected with a password.