Pilz PMI 509 - Manual (Page 46)

Attachment
Operating Manual PMI 5
1002241­EN­05 46
ver Command used to show information on the device
Syntax: ver [/d] [/a] [/hw /p /o /l /s /r /c]
Parameter Description
/d Data mode, display without description, e. g.:
..
PMI 515
10000007
264515
..
/a show all information
/hw outputs the hardware version
/p outputs the processor type
/o outputs the build version of the operating system
/l outputs the bootloader version
/t outputs the device type
/s outputs the serial number
/r outputs the order number
/c outputs the chip set version
xcopy Command used to copy files and directory structures
Syntax: xcopy [­h | ­y | ­g | ­s | ­x | ­t <title>] <sourcedir> <targetdir>
Parameter Description
­y Messages are suppressed
­g Use dialog windows
­s Start copying automatically, only makes sense with
­g
­x End copy dialog automatically, only makes sense
with ­g
­t Set window title (default setting: xcopy), only
makes sense with ­g
­c Delete target directory first
<SourceDir> absolute path of the source directory
<TargetDir> absolute path of the target directory