Nexen DBSE 835030 - Manual (Page 4)

4 FORM NO. L-20017-C-1212
GENERAL SPECIFICATIONS
GENERAL SAFETY PRECAUTIONS
Specifications
Torque: Up to 1200 in-lbs
Disengagement Pressure: 40 psi minimum
Service Temperature:
4.5-104C (40-220F)
Approximate Weight: Up to 20 lbs.
CAUTION
This product has possible pinch
points. Care should be taken when
interacting with this product.
CAUTION
Surface temperature may
exceed safe handling limits
during operation. Do not touch.
CAUTION
Use appropriate guarding for moving
components. Failure to guard could
result in serious bodily injury.
CAUTION
Working with spring loaded or tension
loaded fasteners and devices can cause
injury. Wear safety glasses and take the
appropriate safety precautions.
CAUTION
The temperature limits for the
product are 4.5-104 degree
Celsius (40-220 degree F).
CAUTION
This product has possible pinch
points. Care should be taken when
interacting with this product.
WARNING
Ensure proper guarding of the product is
used. Nexen recommends the machine
builder design guarding in compliance
with OSHA 29 CFR 1910 “Occupational
Safety and Health Hazards”.
WARNING
This product is capable of emitting
a spark if misused therefore is not
recommended for use in any explosive
environment.