Lenco BH-100 - Manual (Page 2)

HEADSET OVERVIEW
OPENNING INSTRUCTIONS
Charging the headset
1.Your headset uses a rechargeable built-in battery,make sure the headset is fully charged before using it
for the first tim.
2.Connect the USB cable to the charging socket,the headset can be charged.
3.During charging,the LED indicator light remains red,when charging completed,it turns to blue.
Turning the headset on
1.Press the power switch button for 3seconds in shutdown mode,the blue indicator light flashes 5 times
and you will hear prompt tone.
Turning the headset off
1.Press the power switch button for 5seconds in standby mode,th e blue ind icator light flashes 5 times
rapidly and you will hear prompt tone.
Pairing and Connecting the headset with a phone
1. Press and hold the power switch button about 7-9 seconds until you see the blue and red indicator light
flashes rapidly and continually by turns,then release the button.
2. Activate the Bluetooth feature on your phone and search for the headset.
3. Select the headset (Lenco BH-100 ) from the list of devices found by your phone.
① Power switch
② Volume up & Next song
③ Volume down & Previous song
④ Microphone
⑤ LED Indicator Light
⑥ Charging socket