Lenco Boost-4 - Manual (Page 5)

2014010 CSR8635 V1.1
5
D.
Power ON and Pairing
1.
Slide the “Power Switch (2)” to “ON” position to turn On the device,
the Bluetooth searching / reconnect function are open;
2.
A series of tones will sound and the “Bluetooth (11)” LED is fast
blinking in blue.
3.
Then, activate the Bluetooth function in your Bluetooth device (such
as Mobile Phone or Personal Computer); the device will enter to
Bluetooth searching mode automatically, if not, tap the relate
selection to manually enter to searching mode. (refer to your device’s
manual when necessary)
4.
Your Bluetooth device should show “Lenco Boost-4” in list, and then
select it for pairing. Waiting for some seconds and you will see
connected message as shown on your mobile device. (For some
Bluetooth devices, you may need to input “0000” as pairing
password)
5.
If pairing is successful, a tone will sound and the “Bluetooth (11)” LED
will keep lighting blue from blinking.
6.
Now, you can start to music play from the mobile device by its music
player program.
7.
Slide the “Power Switch (2)” to “OFF” position to turn Off the device
when it is not in use.
E.
Disconnect from paired device
1.
To disconnect with paired device and for better result, turn Off the
Bluetooth Speaker by slide the “Power Switch (2)” to “OFF” directly;
2.
Or, you can choose “Disconnect” from Bluetooth paired device list on
your mobile device;
3.
In this case; the Bluetooth Speaker will turn back into “Searching /
Pairing” mode in seconds, a series of tones will sound and the
“Bluetooth (11)” LED will turn to fast blinking in blue from lighting.
4.
Now, you can process for new mobile device pair or power Off the
Bluetooth Speaker if you wanted.
F.
Auto reconnect with paired device
1.
Every time you turn On the Bluetooth Speaker’s power; it will firstly
searching for the mobile device which has been paired previously and
still in record;
2.
The Bluetooth Speaker will reconnect this mobile device as priority if
it in Bluetooth searching device mode and in connection range.
3.
If no device found in some seconds, then the Bluetooth Speaker will
automatically turn into pairing mode.
4.
Now you can process for new mobile device pair. (refer to item D.3 ~
D.6 methods)