Lenco CS-450 CD - Manual (Page 7)

6
9. PRESET STATION MEMORY AND TOP/>||, INT, RPT, RDM BUTTONS
a) During radio mode:
Go to any preset station by pressing one of the 6 preset station buttons (1-6).
If one of these buttons is pressed for more than 2 seconds, the station currently being listened to will
be memorized into the selected preset button.
b) During disc, SD or USB mode:
1) Press the TOP/ >|| button briefly to interrupt the playback of the disc, SD/MMC or USB.
Press again to resume normal playback of the disc, SD/MMC or USB.
Press the TOP/>|| button and hold for approximately 0.5 seconds to play the first track of the disc,
SD/MMC or USB.
2) Press the INT button to sample the first 10 seconds part of each track, and the INT ON will be
visible on the LCD display.
In the process of INT, press INT button again to stop sampling and to continue playing the current
track, and the LCD will display INT OFF.
3) Press the RPT button once to play the current track repeatedly, and the RPT ONE will be visible on
the LCD display.
During MP3 disc, SD/MMC or USB mode, press the RPT button twice continuously to playthe
current folder repeatedly, and the RPT DIR will be visible on the LCD display.In the process of RPT,
press RPT button again to stop playing repeatedly mode and the LCD will display RPT OFF.
4) Press the RDM button to play all tracks on disc in random order, and the RDM ON will be visible on
the LCD display.
In the process of RDM, press RDM button again to stop playing in random order and the LCD will
display RDM OFF.
5) During the normal playback of MP3 disc, SD/MMC, USB:
Press the radio preset button 6 and 5 to move up and down10 tracks at a time.
Press and hold the +10/-10 to select the next or previous folder to be play.
10. MODE AND PTY (PROGRAM TYPE) BUTTON
Press the MODE/PTY button to change among tuner (radio), disc (when a disc is loaded), SD /MMC
card (when an SD/MMC card is inserted) , USB (when an USB stick is inserted) and AUX mode.
In Radio mode,Press MODE/PTY button longer to select one of the following mode:
POP M- - NEWS
While selecting PTY TYPE, its selection is implemented by preset buttons as described in preset
key. (press one of the 6 preset buttons shortly and repeatedly to select the PTY TYPE in the preset
button) When POP M or NEWS is on, theprevious PTY program and PTY word is displayed on LCD.
If there are no keys entered for 2 seconds, previously selected PTY is searched. During 1 loop, if
desired PTY is not found, NO PTY is flashed, then return to previous normal radioand PTY icon
goes off.
11. DISP BUTTON
Press the DISP button briefly to display time for 5 seconds on the display, and then returns to its
previous display unless the button is pressed again.
Press the DISPbutton longer more than 1 second untill the clock time flashes,then rotate the VOL
knob to adjust time.