Lenco CS-472 - Manual (Page 15)

14
After enlarging or minifying videos or image, press one of the ^/v/>/< buttons to select the area
you want to view.
In MP3/WMA mode, the ZOOM button is invalid.
4.12 Change Caption Language
In MPEG4 mode, during playback, press the SUBTITLE button repeatedly to select
the language of the caption or turn off the caption.(depend on the file played)
In JPEG/MP3/WMA mode, the SUBTITLE button is invalid.
4.13 Look over Playback Information
1. In MPEG4/MP3/WMA mode, press the OSD button repeatedly to turn on/off the playback
information. When it is on, it will display the information such as: Track serial number, Track
elapsed time, Track remained time, etc.
2. In JPEG mode, press the OSD button to display or disappear the Track serial number.
4.14 Program Playback
It allows you to enter the order in which you want some chapters/tracks in MP3/WMA mode
to play.
1 During playback, press the PROG button to enter a program interface as follows:
2 Use the direction buttons to move cursor onto the desired place for inputting the
sequence number.
3 Use the number button to input desired sequence number of title/chapter/track with
desired sequence.
4 Use the direction button to move cursor onto Play item, then press the PLAY button on remote
or tap the
to play the programmed in programmed order. After input a track number, tap the
to turn to next sequence number, tap to cancel inputting.
* To exit program playback, press the PROG button or tap the ESC to exit.
* To change the programmed sequence, move the cursor onto the item you want to
change, input the desired sequence number.
* During JPEG playback, press the PROG button to change the mode of refresh picture.