Lenco DF-704 - Manual (Page 5)

Play button to confirm selection. A bar shall appear, use Left/Right arrows to adjust the property
and press Play button to confirm. ( Press Exit to leave setting)
Select OSD Language and then press Play button to show OSD options:
English/French/Spanish/ Dutch/German. use Left/Right arrows to select desired OSD language
and press Play button to confirm.
Select Reset Setting and then press Play button, an option of Yes/No shall appear, select
Yes and press Play button to return to factory default setting
Select Firmware version and then press Play button to show the version and time of the firmware
Important Safety Precaution
Keep away from water or moisture and dusty areas
Ambient Temperature 0-40 0 C.Never store in hot and very cold areas
Be carefully to keep it without dropping it or strong impact
Do not try to open the case alone without technical support
Connect the AC adapter to the DC IN jack and to power outlet
Only use attachments/accessories specified by the manufacture
When left unused for a long period of time ,the unit should be unplugged from the household
AC outlet
Do not place the Digital Photo Frame on an unstable cart ,stand, tripod, bracket, or table. The
unit may fall causing injury to you and serious damage to the product
Position the Digital Photo Frame away from sources of high heat such as radiators or stoves
Warning: To reduce the risk of the fire or electric shock, do not expose to rain, moisture, dripping
or splashing.
Troubleshooting
No power
Check to make sure the power plug is plugged into the power outlet
Make sure there is power to the outlet of the product , when in doubt disconnect and connect
again .
Unable to view photos on the Digital Photo Frame
Not all JPEG files are compatible, Please open files in the computer and resave them as
JPEG files ( and/or different resolution) and try to playback in the device
Check if using compatible memory cards
If picture display seems slow
Use lower resolution picture