Drolet 7000 MVRLC - Manual (Page 10)

- Install the wall switch in a convenient location. Route a proper sized wire from
the switch or the thermostat to the gas valve.
Distance
between valve Wire gage
and switch
8’ 22
12’ 20
20’ 18
32’ 16
50’ 14
- Connect the wires in serial with the face plate flame switch ( green wires ).
NOTE : DO NOT CONNECT THE WALL SWITCH WIRE OR THE VALVE TO
120 VOLTS POWER SUPPLY LINE. THE VALVE IS OPERATED BY ITS OWN
MILLIVOLT SYSTEM.
19. If you want to turn the main burner ON and OFF using a wireless remote control,
install the remote control module apart from the gas valve and as close to the front
as possible. Connect the wires as shown.
9