Drolet 7000 MVRLC - Manual (Page 12)

GLASS FRONT REMOVAL CLEANING AND INSTALLATION :
* To remove the glass front, unscrew the six screws holding it in place as shown.
CAUTION : Hold the glass while unscrewing to prevent it from falling.
* Clean the glass only with liquid cleaners or soaps and water, do not use abrasive
cleaners which could remove the coating on the glass.
WARNING : Do not clean when hot, turn off the fireplace at least 30 minutes
before removing the glass front.
* The glass used on your fireplace is a high temperature ceramic 5 mm thick with a
special coating for use with gaseous fuels. Do not replace it with any other material.
CAUTION : Do not operate your fireplace without a glass or with a broken
glass.
11