Lenco DVP-75 - Manual (Page 5)

)
Remote Control
Remote Control
Note:
1. In this manual, will be used to represent
the different NAVIGATION ARROW S on the remote control.
2 In order to operate any of the remote functions. First push the
Power switch in “ON” position.
3. TITLE Function ： The content of a DVD is often divided into several
titles that contain multiple menus. Press for approx. 2 Seconds in the
menu button, the title is displayed. Using the
buttons or
the numerical buttons (0-9) on the remote control, you can select the
desired title or the desired option. Confirm with OK.
HOW TO REPLACE THE BATTERY
STEP 1: PUSH THE BUTTON TOWARD LEFT;
STEP 2: PULL THE BATTERY LOADER OUT
ANGLE
MENU(TITLE)
NUMBER KEY SELECT
STOP
GOTO
FWD
NEXT
PREV
ZOOM
DISPLAY
AUDIO
SUBTITLE
REPEAT
SETUP
MOVE (
REV
ENTER
PLAY/PAUSE
BATTERIES
INCORRECT USE OF BATTERIES MAY CAUSE THEMTO LEAK,
CORRODE OR EXPLODE.
Be sure to place the batteries in the correct direction.
It is dangerous to charge/heat/open or short-circuit the batteries.
Do not leave dead or expired batteries or mix old/new batteries.
When not using the remote control for a long time, remove the
batteries. When operating range becomes reduced, replace all
batteries with new, fresh ones.
If leakage from the battery occurs, wipe the battery liquid from the
battery compartment, then replace.
3