Lenco L-85 - Manual (Page 8)

8
1. Adaptor:
Use this adaptor when playing 45 RPM records.
2. Platter:
Place a record here to play.
3. 33/45 RPM Switch:
Switch 33 or 45 rpm for playing a record at a correct speed.
4. REC:
Press it to enter into record mode.
5. SPLIT
For stopping the current recording, forming a record file manually and
then going on recording the next track.
6. Pick-up arm stand
7. Pick-up Arm Lift Stick:
To raise up and down the Pick-up Arm and cue at a proper place of a
vinyl.
8. Pick-up Arm Lock:
Use this to lock the Pick-up Arm in place when not in use.
9. Dust Cover:
Use this to protect the turntable from exposure to dust. The cover
may be opened or removed during use, but should remain closed
when the turntable is not in use.
10. RCA Line Out Cable
Connect the RCA line out to a mixer or an amplifier in your sound
system.
11. Power Switch:
For turning the power on or off through this switch. Please switch
off the unit after finishing the playing to save the energy..
12. Power Adaptor
Connect this adaptor to an AC outlet of the proper voltage.
13. USB Port Input:
Plug in a USB Pen Drive for recording the music from a record.
*The design is only for USB Flash Drive. To prevent the power
supply is not sufficient and overheated of the circuit(IC), always get
the external power supply if using a hard drive.
14. Reject
Press it to force the arm to return directly to the arm rest
15. LED
 USB Record Operation and LED Signal Indication
 USB storage device is not plugged. -> LED light is off