Lenco LED-2215 - Manual (Page 39)

TROUBLE SHOOTING GUIDE
To assist in locating possible faults use the help guide below.
G N I T O O H S E L B U O R T M O T P M Y S
No Picture, no sound Check that the TV is correctly plugged in.
Check that the TV is connected to a suitable power source.
Check the electrical supply is turned on.
No Picture Ensure that the TV is powered on.
Check that the cables are fitted securely.
Ensure the aerial and/or external sources are connected.
Press the INPUT button to change the source.
Turn the TV on or off.
No Sound Press the MUTE button and check if Mute mode is set.
Switch to another channel and see if the same problem
occurs.
Press V+ button to see if the problem can be solved.
No picture on some
channels Check that correct channel is selected
Adjust the antenna.
No colour on some
channels (black &
white) Check if the same problem exists on other channels.
Ensure the correct picture settings are selected.
Noisy, Snowy,
Ghosting picture. Check the antenna is connected correctly.
Check that the antenna Is in good condition.
Try moving the antenna.
NOTE: The TV must only be repaired by a qualified registered service person. Never
attempt to remove the back cover as the TV has dangerous voltages inside that may cause
fatality or fire.
USER GUIDE
37