Lenco Lucille - Manual (Page 5)

EN-4
Station Presets
Your radio can store up to 20 of your favourite stations as presets on both the DAB and FM bands for
quick call.
To store station presets
y Tune to the station you want to store as a preset.
y Press the MEM button, the memory cell number will flash on the display. Press the CH+ or CH-
button to select a number from 01 to 20.
y Press MEM button again to confirm.
To recall any station presets
y Press CH+ or CH- buttons to select your favourite stations stored.
FM Settings MENU
There are also some menu settings that are specific to FM radio operation. These settings may be
changed through the Setting Menu.
To enter the FM Setting Menu
y Press FUNCTION button to set to FM mode.
y Press the MENU button to show the FM options on the display. Turn the TUNING/SKIP knob to select
an option and press the ENTER/PLAY/PAUSE button to confirm.
More Details of the FM Setting Menu Option
Audio setting
This option enables you to set the radio to receive FM in “Stereo or Mono” mode and “Mono only” mode.
This maybe useful if the signal is weak and the broadcast is noisy.
System
Refer to the DAB part.
FM Display Modes
The bottom line of the display can be switched to show different items of information that maybe
transmitted with an FM station.
To Change the display mode
Press the DISP button repeatedly to change the information displayed while playing an FM radio
station.
The full range of display options are show below. Some station may not broadcast all of these options.
- RDS RADIOTEXT
- PROGRAMME TYPE
- SIGNAL STRENGTH
- STATION NAME
- TIME
- DATE
AUX IN
1. Connect the AUX IN jack on the back of the unit to an audio source, for example, MP3 player with an
audio cable.
2. Press the POWER button to turn on the unit.
3. Press the FUNCTION button repeatedly to switch to AUX-IN mode.
4. Use the native controls on the connected audio device to begin playing music through the connected
the unit.