Lenco PODO-152 - Manual (Page 2)

2
1. Controls and Connections
(1) TFT Display
(2) Clip
(3)
Button (Volume Up)
(4) Button (Volume Down)
(5) Memory Card Slot
(6) Earphone Output Jack
(7) Mic Hole / Reset Switch Hole
(8)
Button (Previous / Fast-Backward)
(9) Button (Next / Fast-Forward)
(10) USB Mini Connector
(11)
Button (Play/Pause, Power On/Off)
(12) M Button (Menu / Enter / Select)
2. Charging the battery
• Make sure that the computer is turned on. Connect
the player to the computer by using the USB cable.
Now the computer will detect and install the driver
automatically. Once the installation is complete, the
player will be displayed in “My Computer” or for
MAC users on the desktop.
Note: For Windows 98/98SE the driver needs to be
installed first.
• Once connected to a computer the player will
charge automatically (computer needs to be turned
on). After 2-3 hours the battery is fully charged. At
same time, the player is ready for media files upload
/ download with your computer.
3. Downloading the User’s Manual
• For consider environment protection, the detailed
User’s Manual is stored on the Player’s memory, or
on the CD if provided, in a folder named “UTILITIES
> User Manual”. To open it you need to download it