Lenco SCD-24 - Manual (Page 6)

PROGRAMMED PLAYBACK
Programmed playback enables tracks on a disc to be played in the desired order. Up to 20 tracks can be programmed.
1. Press the " PROGRAM " button.
2. Press the " NEXT/FF " and " BACK/FB " buttons to select the desired track number.
3. Press " PROGRAM " button again to memorize the track.
4. Repeat steps 2 and 3 until all desired tracks are programmed.
5. Press the " PLAY/PAUSE " button to start. " PROGRAM " is flashing on the CD display.
6. Press " STOP " button to stop programmed playback.
7. Press " PROGRAM " and " PLAY/PAUSE " buttons to resume programmed playback.
8. Open the CD door or turn off the CD player to clear the programmed memory.
Note : Programming can only be made when the player is in stop mode.
To Erase the Memory(Program)
To clear the program, you may have two ways:
1. Press STOP button when the disc is stopped, or
2. Open the CD compartment lid, program will be erased.
GB 4
REPEAT PLAYBACK
Note on CD-R/RW discs
- Because of non-standardized format definition/ production of CD-R/RW, playback quality and performance are not
guaranteed.
- Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions, such as PC performance,
writing software, media ability, etc.
- Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.
- It is recommended to record only audio files on CD-R/RW discs for easy reading.
BASS BOOST
To enjoy a BASS BOOST sound effect,
press BBS button.
This function allows a single track or all tracks on a disc to be played repeatedly.
REPEAT
PLAY
REPEAT ALL
PLAY
TO CANCEL REPEAT PLAYBACK FUNCTION
Press the REPEAT button again until " REPEAT " or
" REPEAT ALL " disappears from the display.
TO REPEAT THE SAME TRACK
Press the REPEAT button once
during playback, the CD display
will indicate " REPEAT ".
TO REPEAT THE WHOLE DISC
Press the REPEAT button twice
until " REPEAT ALL" displays.
PROGRAM PLAYBACK
" PROGRAM "
PROGRAM
CD display
SR24ECD-ENG-FM-LENCO-TCD05SF ERP2 rev01.indd 6 28/3/2013 16:31:01