Lenco SCD-38 USB - Manual (Page 5)

GB 3
FM
COMPACT DISC PLAYBACK
NOTE :
FM stereo LED indicator lights if receive FM stereo broadcast .
AFTER LISTENING
Set the FUNCTION selector to OFF.
1 . Set to CD
2 . Open the CD door by pushing
Open / Close CD button.
3. Insert a disc with the label side facing up.
4 . Close the CD door.
The disc will rotate and
the total tracks of the disc
will show on the display.
CD
FUNCTION 5. Press the PLAY/PAUSE button.
Track number "01" & the symbol " " & "DISC"
will be shown during normal compact disc playback.
Track number "001", the symbol " " & "DISC &
MP3" will be shown during MP3 playback.
Track number "001", the symbol " " & "DISC &
WMA" will be shown during WMA playback.
Track number "001", the symbol " " & "USB"
will be shown during USB playback.
CD display MP3 display WMA display
USB display
TO INTERRUPT PLAYBACK
Press the Play/Pause button and the symbol " " will
be flashed. Press the button again to resume playback.
CD display MP3 display WMA display
USB display
FOR BETTER RECEPTION
TO STOP PLAYBACK
Press the STOP /CD/USB button and the display
shows the total tracks of the disc.
TO SKIP TO THE BEGINNING OF A TRACK
• Press either one of the PREV NEXT buttons according to the desired skip direction.
• Play/back resumes from the selected track.
• When the PREV button is pressed once during play, the previous track starts again.
• When the NEXT button is pressed once during play, the next track plays.
SEARCHING FOR A PASSAGE WITHIN A TRACK
• Keep the PREV or NEXT button
pressed during playback, and release the button
as soon as you recognise the desired passage.
Then normal CD playback will resume from this point.
Unit will be automatically off within 15 mins without further operation (in stop mode / CD door open).
After auto off, slide the FUNCTION selector to OFF position and then slide to RADIO / CD position for listening.