Gb 2, Clock adjustment – Lenco SCR-97 MP3 KIDS User Manual

Page 4

Advertising
background image

GB 2

ADJUSTING THE SOUND

WHEN RECORDING

The VOLUME control may be adjusted with no effect on

the recorded signal.

FOR PRIVATE LISTENING

Plug in headphones (ø3.5 mm stereo mini-plug) to the

PHONES jack.

When headphones are plugged in, the speakers are

automatically disconnected.

TO ADJUST THE VOLUME

MIN. MAX.

VOLUME

TURN ON / OFF THE SYSTEM

POWER

Press the POWER button to turn the audio on.

To change the audio mode between CD, RADIO and TAPE ,

set the FUNCTION switch while the power is on.

The audio mode is displayed.

Turn off the unit by pressing the POWER button.

The current time is shown on the display.

The clock is displayed on LCD display at standby mode.

on LCD display at standby mode.

1. Press the PROGRAM / CLOCK-ADJ. button,

2. Press the NEXT or BACK to select 12 hours or 24 hours display.

3. Press the PROGRAM / CLOCK-ADJ. button, the hour digit flash.

the hour digit flash.

4. Press the NEXT or BACK to adjust hour digit.

5. Press the PROGRAM / CLOCK-ADJ. button, the minute digit flash.

6. Press the NEXT or BACK to adjust minute digit.

7. Press the PROGRAM / CLOCK-ADJ. button again,

the correct time is shown on display.

CLOCK ADJUSTMENT

CLOCK-ADJ.

LCD display

LISTENING TO THE RADIO

2 . Set to RADIO

FUNCTION

RADIO

1 . Turn on the unit by

pressing the POWER button.

POWER

CD display

3 . Select a MODE.

MODE

FM ST. FM MONO

4 . Tune in to a station.

5 . Adjust the sound.

VOLUME

MIN. MAX.

TUNING

FOR BETTER RECEPTION

FM

NOTE :

1. FM stereo LED indicator lights if receive FM stereo broardcast and the MODE switch

set on "FM STEREO".

2. When too much noise is heard during FM STEREO reception, set MODE switch to FM mono.

AFTER LISTENING

Turn off the unit by pressing the POWER button.

Advertising