Maintenance, Specifications – Lenco TFT-1527 User Manual

Page 15

Advertising
background image

14

15

NOTE: There is a problem in VGA mode.(Only VGA mode applied)

NOTE: There is a problem in VGA mode.(Only VGA mode applied)

PROBLEM POSSIBLE SOLUTION

PROBLEM POSSIBLE SOLUTION

- Adjust resolution, horizontal frequency, or vertical frequency.
- Check it whether the signal cable is connected or loose.
- Check the input source.

- Work the auto configure or adjust clock, phase, or H/V position.

- Check the signal cable.
- Reinstall the PC video card.

Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have

your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.

1. Here’

s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm

water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then

used it to wipe the s- creen.

2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth.

If you expect to leave your TV dormant for a long time(such as a vacation), it’s a good idea to

unplug the power cord to protect against possible damage from lightning or power surges.

The signal is out of range.

Vertical bar or stripe on

back ground&Horizontal

Noise&Incorrect position.

Screen color is unstable

or single color.

Maintenance

Maintenance

Cleaning the screen

Cleaning the screen

Cleaning the cabinet

Cleaning the cabinet

Extended Absence

Extended Absence

Specifications

1 (21pin Scart)

Panel Features

Screen Size

15.6 inch

Active Area

344.232

193.536

mm(H) X

mm(V)

Aspect Ratio

16:9

Panel Resolution

1366 X 768

Brightness

250 cd/m²

Contrast Ratio

500:1

Viewing Angle

90º(H) X 65º (V)

Dot Pitch

0.252mm(H) X 0.252mm(V)

Maximum Colour

16.7M

Response Time Black-White (R&D)

8ms

OSD Languages

TV Function

Broadcast System

PAL/SECAM

Receiving Channel

Video Standards Supported

NTSC / PAL / SECAM

NTSC / PAL / SECAM

S-Video Input

Composite Video input

Antenna (RF)

Audio Output

Maximum Audio Output

Input Connections

TV Input

1 (RF - 75 Ohm)

VGA Input

1 (15 pin D-Sub)

AV Input

L+R Audio Input(For AV,S-Video)

1 Composite(Yellow RCA)

1 (White RCA,Red RCA)

PC Audio in

Stereo Mini Phono Jack Input (3.5mm)

VGA Resolutions Supported

640x480 @ 60Hz/75Hz
800x600 @ 60Hz

/75Hz

1024x768 @ 60Hz

/75Hz

Power

2 x 3W

1360x768@ 60Hz

PAL / SECAM

B/G,D/K/I/L/LL

SCART Input

HDMI Input

1 (19 pin )

S-VIDEO

1

(

4 pin DIN

)

English, French

Spanish

German

Dutch

Power Adapter

TV Power Input

Power Consumption

DC 12V 4A

< 48W

AC 100V - 240V~ 50 / 60Hz

Advertising