Lenco TFT-726 - Manual (Page 10)

(4) Sort
Sort your channels from the following options:
[LCN] - Sort the channels in ascending order
[Name] - Sort
[Service ID] - Sort the channels according to the station
the channels in alphabetical order
(5) LCN (Logical channel number)
Set LCN on or off.
(1). Aspect Ratio
(2). Resolution
You must set the display format to either 4:3 PanScan, 4:3 Letter Box,
16:9 Full Screen or Auto to get the maximum display when watching TV.
If the video does not appear correctly, change the setting. This setting
is to match the most common setting for HDMI.
[480i]: for NTSC system TV.
[480P]: for NTSC system TV.
[576i] for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.
(3). TV format
If the video does not appear correctly, you need to change the settings.
This should match the most common setting for TVs in your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
(6) Video Setting
To access the Menu, press MENU then select [Picture]. The Menu
provides options to adjust the video settings. Press UP/DOWN to
select an option and press RIGHT/LEFT to adjust that setting.
Press EXIT to exit the menu.
Aspect Ratio 16:9 Wide Screen
Resolution 1080i
TV Format PAL
Picture
Confirm Return OK EXIT
1 . Auto Search
Search and install all channels automatically. This option overwrites all
preset channels.
1. Select [Auto Search] and press OK or RIGHT to start channel search.
2. To cancel channel search, press EXIT.
(7) Channel Search
To access the menu,press MENU and select [Search Channel]. The
Menuprovides options to adjust the Search Channel settings.
Select an option and press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the Menu.
001 ITV1
002 ITV2
003 ITV3
004 ITV News
005 Channel 4
006 Quiz Call
007 E4
008 More 4
009 ITV4
Channel Search
Progress
506.0MHz/8MHZ
DTV:009 Radio: 000
Skip Exit MENU EXIT
Auto Search
Manual Search
Country France
Antenna Power ON
Channel Search
Confirm Return OK EXIT
9