Lenco TT-28 - Manual (Page 11)

CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
PRECAUTIONS FOR USE
INSTALLATION
• UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
• DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE
ALL OTHER CONNECTIONS HAVE BEEN MADE.
• DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
LOCATION OF CONTROLS
1) DUST COVER
2) DIAL POINTER
3) LEFT SPEAKER
4) VOLUME KNOB
5) POWER OFF/FUNCTION SELECTOR
6) 3.5MM STEREO HEADPHONE JACK
7) RIGHT SPEAKER
8) TUNING KNOB
9) BAND/FM STEREO SELECTOR
10) FM STEREO LED INDICATOR
11) SPINDLE ADAPTOR
12) 33/45 RPM SPEED SELECTOR
13) PICK-UP HOLDER
14) LINE OUT SOCKET
15) FM ANTENNA
16) AUTO STOP SWITCH
17) AC CORD
CONNECTION
1. CONNECT THE POWER CORD TO AC OUTLET
2. SWITCH THE SYSTEM TO “ RADIO “ FUNCTION. IF THE BACKGROUND OF THE DIAL SCALE LIGHT UP
WITH AMBER LIGHT, IT’S MEAN THE POWER SUPPLY IS NORMAL. NOW YOUR SYSTEM IS READY TO
PLAY THE MUSIC.
LISTENING TO RADIO
MANUAL TUNING
1. PRESS “FUNCTION/BAND” BUTTON AND SELECT THE DESIRED BAND (AM OR FM OR FM-STEREO).
2. TUNE TO THE REQUIRED STATION BY TURNING THE TUNING KNOB.
3. ADJUST VOLUME KNOB TO THE DESIRE VOLUME LEVEL.
FM & FM-STEREO RECEPTION
SET THE FM MODE SELECTOR AT THE “ FM ” POSITION. PROGRAMS ARE RECEIVED IN MONO MODE. IN
PARTICULAR WHEN STEREO SIGNAL ARE TOO WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM
IN MONO.
SET THE FM MODE SELECTOR AT “FM-ST” POSITION FOR RECEIVING STEREO PROGRAMS. THE
FM-STEREO LED INDICATOR WILL LIGHT UP TO SHOW FM STEREO PROGRAM IS BEING RECEIVED
GB-1
16