Lenco XEMIO-260 - Manual (Page 3)

XEMIO-250/260
USER MANUAL
3
E. Using with MAC OS 9.X system or above
1. Connect the player with MAC computer, “Untitled” icon will display on the
desktop indicating the player is a removable disk, user can operate read and
write function.
2. When you need to disconnect the player from the USB plug, please drag
“Untitled” icon to the recycled bin, then unplug the player, otherwise, the data
stored in MP3 might be loss.
Note: This player supports MAC 9.2 system or above.
F. Troubleshooting
No Power 1. Check if battery is low.
2. Check if the player is ON.
No sound from
earphone
1. Check to see Volume is set “0” and connect the earphone
connects properly.
2. Make sure earphone is clean and in good status.
3. Damaged MP3 file may make noise and could not be played
Make sure that the music files are not damaged.
Failure of music
download
1. Check if USB cable is damaged and connected properly.
2. Check if driver is installed correctly.
3. Check if memory space is enough.