Altera MAX 10 Embedded Multipliers - Manual (Page 20)

GUI Parameter Parameter Condition Value Description
What is the source for
clock input?
INPUT_REG_B • Input
Configuration
> Register
input B of the
multiplier =
On
• Input
Configuration
> More
Options
Clock0–Clock3 Specifies the clock port
for the
datab[]
port.
What is the source for
asynchronous clear
input?
INPUT_ACLR_
B
• Input
Configuration
> Register
input B of the
multiplier =
On
• Input
Configuration
> More
Options
• Aclr0–Aclr2
• None
Specifies the asynchro‐
nous clear port for the
datab[]
port.
What is the input A of
the multiplier
connected to?
— — Multiplier input By default, input A of
the multiplier is always
connected to the
multiplier’s input.
What is the input B of
the multiplier
connected to?
— — Multiplier input By default, input B of
the multiplier is always
connected to the
multiplier’s input.
Register output of the
multiplier
— — On or Off Turn on to enable
register output of the
multiplier.
What is the source for
clock input?
MULTIPLIER_
REG
• Output
Configuration
> Register
output of the
multiplier =
On
• Output
Configuration
> More
Options
Clock0–Clock3 Specifies the clock
signal for the register
that immediately
follows the multiplier.
UG-M10DSP
2014.09.22
ALTMULT_ACCUM Parameter Settings 5-5
ALTMULT_ACCUM (Multiply-Accumulate) IP Core References Altera Corporation
Send Feedback