Altera Nios II Embedded Evaluation Kit Cyclone III Edition User Manual
Page 41
5–5
Development Board Version 1.0.
Altera Corporation
Nios II Embedded Evaluation Kit, Cyclone III Edition
July 2010
Picture Viewer Application
Figure 5–4. Running the Picture Viewer Application
You can control the slide show as explained below:
●
To display the next image before the delay time is finished, touch
the Forward
button located at the right center of the touch
panel.
●
To display the previous image, touch the Reverse
button
located at the left center of the touch panel.
●
To play or stop the slide, touch the Play
/Stop
button.
●
On the top center of touch panel you will see the Delay-period
(in Sec.). You can increase or decrease the delay period by
touching the Plus
or
Minus
buttons respectively.
The maximum delay period you can set is 20 seconds. The
minimum is 1 second. The default delay period is 5 seconds.