Altera Arria GX - Manual (Page 26)

A–8 Getting Started User Guide Altera Corporation
Arria GX Development Kit October 2007
Using the Parallel Flash Loader
Figure A–6. Hardware Setup Selections
10. Click Auto Detect and, in the displayed JTAG chain ( Figure A–7 ),
verify the correct setup: the EPM570 MAX II device, the CFI_512MB
flash chip, and the Arria GX FPGA, EP1AGX50CF484C6N. You will
program the MAX II device and the flash chip with a POF.
1
You may have to press the CONFIG push-button switch
(S5) on the board during this process before the flash chip
appears in the chain.
Figure A–7. JTAG Chain