Altera Partial Reconfiguration IP Core - Manual (Page 3)

Figure 3: Partial Reconfiguration IP Core in the Qsys Interface
4. Turn on Enable Avalon-MM slave interface to use the Avalon Memory Map Slave interface rather
than the Conduit interface.
5. Click Finish.
Related Information
• Instantiating the Partial Reconfiguration IP Core in the Quartus II IP Catalog on page 3
• Partial Reconfiguration IP Core Parameters on page 6
• Creating a System With Qsys
Instantiating the Partial Reconfiguration IP Core in the Quartus II IP
Catalog
Partial Reconfiguration(PR) is available from the IP Catalog.You can choose to instantiate the core as an
internal host or an external host.
If you are not using PR as a component of the Qsys interface, then you can instantiate PR with the
Quartus II IP Catalog.
The PR IP core can be instantiated as the internal host for Stratix V devices. When internal host is
specified, both
prblock
and
crcblock
WYSIWYG atom primitives are auto-instantiated as part of the
UG-PARTRECON
2015.05.04
Instantiating the Partial Reconfiguration IP Core in the Quartus II IP Catalog 3
Partial Reconfiguration IP Core Altera Corporation
Send Feedback