Altera Nios Development Board Cyclone II Edition - Manual (Page 5)

Altera Corporation v
May 2007 Nios Development Board Cyclone II Edition
About this Manual
This manual provides details about the Nios ® development board,
Cyclone™ II Edition.Nios Development Board Cyclone II Edition
The table shows this document’s revision history.
How to Contact
Altera For the most up-to-date information about Altera products, refer to the
following table.
Date & Revision Description
May 2007, 1.3 ● Corrected Figure 1-1 and Figure 2-21.
● Revised “How to Contact Altera” .
● Updated headers and footers.
October 2006, 1.2 ● Corrected statement: LEDs D0 - D7 turn on when driven
to 0, not 1.
● Updated headers and footers.
June 2006, 1.1 ● Updated part numbers to RoHS compliant parts
● Corrected D7 pin information in LED pin table
● Removed pin labels from J19 figure
● Added J19 pin table
● Changed PROTO1 and PROTO2 figures to use board
net names
● Added PROTO1 and PROTO2 pin tables
● Corrected FPGA pin label for CON3 pin 9 in PMC
Connector pin table
● Added new pin AE15 to PMC Connector pin table
● Added U69 pin table
● Corrected factory config button figure
● Added pin and device information and corrected net
name for U3 Starting Configuration step 3
● Improved clock circuitry figure
● Added clock signal pin tables
May 2005, 1.0 First publication.
Contact (1)
Contact
Method
Address
Technical support Website www.altera.com/support
Technical training Website www.altera.com/training
Email [email protected]