Saab 2008 9-3 - Manual (Page 110)

110 Instruments and controls
MAX heat (red indicator):
MAX heating is obtained when the temper-
ature knob is turned to the first position past
79 (to the red LED).
The driver’s side selection controls air distri-
bution and the recirculation status. The tem-
perature can be adjusted on the passenger
side.
MAX heating produces:
• Max heat.
• Air distribution to windscreen and floor.
• Recirculation OFF.
• High fan speed.
MAX cooling (blue indicator):
MAX cooling is obtained when the tempera-
ture knob is turned to the first position past
61 (to the blue LED).
The driver’s side selection controls air distri-
bution and the recirculation status. The tem-
perature can be adjusted on the passenger
side.
MAX cooling produces:
• Max cooling effect (A/C compressor will
run even if AC OFF has been selected).
• Air distribution through panel vents.
• Max fan speed.
• Recirculation ON.
Condensation water
When the A/C compressor is on, the incom-
ing air is dehumidified. The resulting con-
densation water is drained away through an
outlet under the car.
It is therefore perfectly normal for water to
be seen dripping from this outlet when the
car is parked. The warmer the ambient air
and the higher the humidity, the more con-
densation will form.
93_US_M08.book Page 110 Friday, May 11, 2007 11:37 AM