Menu overview, Standard display, Trip computer – Mercedes-Benz 2013 C Class Coupe User Manual
Page 220: Calling up the range, Switching the daytime driving lights on/off, On-board computer, On-board computer and displays
Values and settings as well as display mes-
sages are shown in multifunction display :.
Menu overview
Operating the on-board computer
(
R
R
R
R
Current fuel consumption
R
Digital speedometer
R
Message memory (
R
R
Tyre pressure loss warning system
(
R
R
Standard display
X
Press and hold the V button on the
steering wheel until the standard display
with trip meter : and total distance
recorder ; is shown.
X
To reset the trip meter: press and hold
the V button until the standard display
appears.
X
Press and hold the C button until the
value has been reset.
Trip computer
X
Press the V button on the steering
wheel repeatedly until the trip computer
appears.
:
Distance
;
Average speed
=
Time
?
Average fuel consumption
X
To reset the trip computer: press and
hold the C button on the steering wheel
until the values have been reset.
Calling up the range
X
Press the V button on the steering
wheel repeatedly until the approximate
range appears.
The approximate range which can be covered
depends on the fuel level and your current
driving style. If there is only a small amount
of fuel left in the fuel tank, the display shows
a vehicle being refuelled C instead of the
range.
Switching the daytime driving lights
on/off
If you have activated the
Day. driv.
lights:
function and the light switch is in the
218
Displays and operation (4-button multifunction steering wheel)
On-board computer and displays