Mercedes-Benz 2013 C Class Coupe - Manual (Page 233)

X Press the : or 9 button to select the
Display unit Speed-/odometer: func-
tion.
You will see the selected setting:
km or
miles .
X Press the a button to save the setting.
The selected unit of measurement for dis-
tance applies to:
R
The digital speedometer in the Trip menu
R
Total distance recorder and the trip meter
R
Trip computer
R
Current consumption and the range
R
The navigation instructions in the Navi
menu
R
Cruise control
R
SPEEDTRONIC
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
Switching the additional speedometer
on/off
Vehicles for the United Kingdom: this func-
tion is unavailable.
Only vehicles with manual transmission have
this function.
The
Addit. Speedo [mph] function allows
you to choose whether the status area in the
multifunction display always shows the speed
in mph instead of the outside temperature.
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X Press the = or ; button on the steer-
ing wheel to select the
Settings menu.
X Press the : or 9 button to select the
Instrument cluster submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Addit. Speedo (mph) function.
You will see the selected setting: on or
off .
X Press the a button to save the setting.
Selecting the permanent display function
Vehicles for the United Kingdom: this func-
tion is unavailable.
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X Press the = or ; button on the steer-
ing wheel to select the
Settings menu.
X Press the : or 9 button to select the
Instrument cluster submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Permanent display: function.
You will see the selected setting: outside
temperature or Dig. speedo [mph] .
X Press the a button to save the setting.
i The speed is displayed in mph.
Lights
Switching the daytime driving lights on/
off
The
Daytime driving lights function can
only be switched on with the engine turned
off.
X Press the = or ; button on the steer-
ing wheel to select the
Settings menu.
X Press the : or 9 button to select the
Light submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Daytime driving lights function.
If the Daytime driving lights function
has been switched on, the cone of light and
the W symbol in the multifunction dis-
play are shown in orange.
X Press the a button to save the setting.
Further information on daytime driving lights
(
Y page 119).
Displays and operation (12-button multifunction steering wheel)
231
On-board computer and displays
Z