Oldsmobile 2000 Silhouette User Manual
Page 315
5-32
6. Make sure the tire is stored securely. Push, pull, and
then try to rotate or turn the tire. If the tire moves,
use the folding wrench to tighten the cable.
Put back all jacking tools as they were stored in the jack
storage compartment and put the compartment cover
back on.
To put the cover back on, line up the tabs on the right
of the cover with the slots in the cover opening. Push the
cover in place and push down the tab so that it rests in
the groove. This secures the cover in place.
A. Strap
B. Bag and Tools
C. Jack
Unless you have the plastic “bolt
-
on” wheel covers, be sure
to also store the center cap. When you replace the compact
spare with a full
-
size tire, reinstall the bolt
-
on wheel covers
and the center cap. Tighten them “hand
-
tight” over the
wheel nuts, using the folding wrench.