Cleaning the top of the instrument panel, Cleaning interior plastic components, Cleaning the built-in child restraint pad – Oldsmobile 2000 Silhouette User Manual

Page 368: Cleaning glass surfaces, Cleaning the built, Care of safety belts and built, Caution

Advertising
background image

6-51

Cleaning the Top of the Instrument Panel

Use only mild soap and water to clean the top surfaces
of the instrument panel. Sprays containing silicones or
waxes may cause annoying reflections in the windshield
and even make it difficult to see through the windshield
under certain conditions.

Cleaning Interior Plastic Components

Use only a mild soap and water solution on a soft
cloth or sponge. Commercial cleaners may affect the
surface finish.

Cleaning the Built

-

in Child

Restraint Pad

The built

-

in child restraint pad is attached to the seat

frame with fastener strips. You can remove the pad and
hand wash it with mild soap and water.

Care of Safety Belts and Built

-

in

Child Restraint Harness

Keep the safety belts and the built

-

in child restraint

harness clean and dry.

CAUTION:

Do not bleach or dye safety belts or the built

-

in

child restraint harness. If you do, they may be
severely weakened. In a crash, they might not be
able to provide adequate protection. Clean the
safety belts and the child restraint harness only
with mild soap and lukewarm water.

Cleaning Glass Surfaces

Glass should be cleaned often. GM Glass Cleaner or
a liquid household glass cleaner will remove normal
tobacco smoke and dust films on interior glass.
(See “Appearance Care and Materials” in the Index.)

Don’t use abrasive cleaners on glass, because they may
cause scratches. Avoid placing decals on the inside rear
window, since they may have to be scraped off later.
If abrasive cleaners are used on the inside of the rear
window, an electric defogger element may be damaged.
Any temporary license should not be attached across the
defogger grid.

Advertising