Subaru 2011 Tribeca - Manual (Page 155)

22
Media Hub
iPod ® – Using an original Apple iPod cable,
connect the USB end into the Media hub.
Then connect the iPod connector into the
iPod. NOTE: the Media hub kit does not
include the iPod cable. Also, while your
iPod is connected the buttons on the
iPod are deactivated.
USB Storage Device – Using a USB
equipped storage device, connect the
USB end into the Media hub.
Connecting to the Media Hub
Bluetooth Device – Pairing of a Bluetooth
audio device is handled through the device
itself. The pairing sequence depends on the
device, but generally follows this order:
1. Turn the audio system on.
2. Go to Media 2 by pressing the SAT button
located on the audio system repeatedly.
3. Activate the Bluetooth on the device.
4. Use the search for new device function
on the device until the Media hub
(“SUBARU”) is found.
5. Initiate pairing by the phone or device.
6. Enter the pas-key.
793593_11a_Bluetooth_QRG_072310.indd 22 7/23/10 11:24 AM